| TM-2564G / GP Series |
| Multi Vital Signs Monitor |
 |
  |
| Our high-end vital signs monitor promises closer monitoring of patients with multiple parameters. The TM-2564G series provides you with information on the patient's condition through its comprehensive color graphic screen, showing various waveforms & readouts. It's compactness, light weight and built-in rechargeable battery enables portable measurement to support healthcare professionals. |
 Brochure (PDF 398KB) |
| Manual (PDF 1,462KB) |
|
 |
| Features |
 NIBP Measurement
Automatic pressurization level control promises easy and comfortable NIBP measurements even at interval measurement (continuous to 120 min.) A neonate measurement is equipped in consideration of the safety of young patients.
SpO2 Measurement
The TM-2564G series shows plethysmograph on the display for better analysis. And Nellcor OximaxTM sensor promises stable measurements at various conditions
ECG Measurement
A fine LCD screen enables dual line display of waveform for closer monitoring of patients.
Neonatal BP measurement
Color TFT Display for clear monitoring of waveform & readout
Color TFT dot matrix screen brings clear monitoring of waveform & readout even when you are away from the monitor. Also shows quick SYS while patient is under interval measurement.
Alarm Function for upper/ lower limits
TM-2564G series generates buzzer sound when the measurement result exceeds the higher or lower limits set through the display. Furthermore red lights on the roof of the unit also blink for visual warnings.
Small & Lightweight Design for Portability
TM-2564G series was designed for portability within the facility or even remote locations. As light as 1.2kg (GP model - 1.4kg), you can carry it wherever you need to take measurement.
Rechargeable Battery Operation
A rechargeable battery comes as standard with the package to take measurement in portable locations and/or to be used in environments with poor electrical supply.
Printout Capability (TM-2564GP)
The TM-2564GP is equipped with 58mm thermal type dot matrix printer. This printer generates waveforms, list of data, trend, graph and setting parameters ensuring complete records for patients. |
| Blood pressure |
| |
Measurement Method |
Oscillometric |
| Measurement Range |
Blood Pressure |
10 ~ 280 mmHg |
| |
Pulse Rate |
30 ~ 200 bpm (adult)
30 ~ 240 bpm (neonate) |
| Accuracy |
Pressure
Pulse Rate |
+/- 3 mmHg
+/-5% |
| Pressurization |
Method
Maximum Pressure
Preset Pressure |
Diaphragm Pump
300 mmHg (adult)150mmHg(neonate)
Automatic,100-260mmHg(20mmHg step) adult 80-140mmHg(20mmHg step) neonate |
| Pressure Control Method |
Method |
Electric Controlled Exhaust Valve (ECEV) |
|
| |
| SpO2 Measurement |
| |
Measurement Method |
2-Wave Length Pulse Oximetry |
| Measurement Range |
Oxygen Saturation 40 ~ 100%
Pulse Rate Measurement Range 30~ 250bpm |
|
| |
| ECG Measurement |
| |
Patient Input |
3-Electrode System |
|
| Input Impedance |
50M Ohm |
| Differential Dynamic Range |
+/- 300mV |
| Measurement |
Return time |
0.5sec (0.3-60Hz) / 3.2sec (0.05-200Hz) |
| Hum Elimination |
50/60Hz |
| Pulse Rate Measurement Range |
20 ~ 300bpm |
|
| |
| Interval Setting |
CON, 2.5, 3, 5, 10, 15, 20, 30, 60, 90, 120 min. |
|
| |
| Monitoring Function |
Systolic, Diastolic, Pulse and SpO2 |
|
| |
| Memory Data |
400 last measurement data (BP, Pulse & SpO2) |
|
| |
| Power Supply |
| |
AC |
AC Adapter |
DC 15V, 2A |
| DC |
Rechargeable Battery |
Battery pack (Ni-MH) |
| Battery Life |
90 minutes (at 5 min. interval measurement) |
|
| |
| Temperature & Humidity |
Operating Temperature/Humidity |
+10°C ~ +40°C (50°F ~ 104°F), Less than 85%RH (non-condensing) |
| Storage & Transportation Storing Temperature/Humidity |
-20°C ~ +55°C (14°F ~ 131°F), Less than 95%RH (non-condensing) |
|
| |
| External Dimensions |
160(W) x 143(H) x 138(D) mm |
| 205(W) x 143(H) x 138(D) mm - printer models |
|
| |
| Weight |
Approximately 1.2 kg. ~ 1.4 kg. |
|
| |