Product

Weighing

AD-8552EIP
RS-232C to EtherNet/IP Converter
AD-8552EIP RS-232C to EtherNet/IP Converter
   PDF Brochure (PDF 3.5MB)
   PDF Manual (PDF 3.0MB)
   PDF Simplified Manual (PDF 1.4MB)
   DL Download the EDS File
Features
Conversion between the RS-232C signals of weighing instrument(s) and the EtherNet/IP signals of a control device (PLC)
Four D-Sub 9-pin connectors to communicate with up to four weighing instruments via RS-232C cables
Two RJ-45 connectors to enable connection of more than one AD-8552EIP to one PLC by daisy-chain connection via LAN cables
Hooks on the back for DIN-rail mounting
Auto MDI-X/MDI supported
Power supply to weighing instrument(s)*2
Function to fix the decimal point position of weighing data
Web interface for operational checks

*1 Star connection through a hub, or a combination of star and daisy-chain connections, can also be employed.
*2 For the AD-4212C/AD-4212D, GX-A(E/WP)/GF-A(WP), HR-AZ/HR-A, FZ-i(WP)/FX-i(WP), or EK-L only. The separately-sold RS-232C cable, AX-KO2741-180, is required for supplying power to weighing instruments other than the AD-4212C/AD-4212D.
Specifications
General
Power supply voltage DC 24 V +10%, -15%
Power consumption 9 W max. (when power is supplied to 4 weighing instruments)
Communication interface RJ-45 × 2 (for EtherNet/IP)
D-Sub 9-pin, male × 4 (for RS-232C)
Operating environment 0 to 50 °C (32 to 122 °F), 85% RH or less (no condensation)
External dimensions 105 (W) × 112 (H) × 103 (D) mm
Net weight Approx. 440 g
Communication (EtherNet/IP)
Communication standard EtherNet/IP (CT18 compliant)
Vendor ID 188
Device type 43 (0×2B) : Generic Device
Transmission speed 10/100 Mbps (auto negotiation)
Communication method Full/half duplex (auto negotiation)
Communication (RS-232C)
Baud rate 2400*i, 9600, 19200, 38400 bps
Data length 7 bits (fixed)
Parity Even (fixed)
Terminator <CR><LF> (fixed)
*i Factory setting

Page Top