A Weighing Indicator Designed for CC-Link with High-Performance Digital Filter
Easy-to-use weighing indicator specifically for CC-Link.
Realizes both an extremely fast response speed and stable weighing in high vibration environments.
Enhances the performance of weighing devices that structurally have a source of vibration.
Wide zero adjustment range.
Direct connection to CC-Link with the CC-Link interface (provided as standard) High-performance digital filtering that eliminates the effects of strong vibration Simple design to facilitate connection to a PLC High-speed (100 times/sec.), highly-accurate performance Compact, lightweight body makes it ideal for mounting into a control panel Dust and water-proof display (when mounted into a panel) Up to 64 units can be connected with one master unit (when configured with the AD-4408C)
Videos
Specifications
Analog Unit
Minimum input sensitivity
0.15µV/d
Zero adjustment range
-35mV to +35mV (-7mV/V to +7mV/V)
Load cell excitation
DC5V±5%, 120mA
Equipped with remote sensing
Up to 8 load cells(350Ω) can be connected.
Actual load calibration or digital span calibration without actual load
Digital Unit
Display element
Measurement data display: 7-segment 6-digit green LED with 14.6mm high characters
Polarity display: Green LED (1)
Status display: Red LEDs (6)
Measurement data display unit
Switch to net weight value (NET) or gross weight value (GROSS).
Display range:0 to 999,999d (Select division from 1, 2, 5, 10, or 50)
Units:Affix a "g","kg",or"t"unit sticker
Status display
ZERO, STABLE, GROSS, NET, HOLD,and___(selected function in operation)
External I/O
CC-Link I/O
Up to 64 devices can be connected with one master unit by selecting the number of occupied stations when configured with the AD-4408C.
Standard serial output
20mA current loop signal (exclusive output for A&D peripheral devices)
General specifications
Power
AC100 to 240V (+10%-15%) (50/60Hz)
Power consumption
Approx.10VA
Operating temperature and humidity
-10°C to 40°C/85%RH or less(no condensation)
Physical dimensions
144(W) × 72(H) × 135(D) mm (including protruding parts)
Panel cutout size
138 × 68 mm
Dust and water-proof
The IP65 display is dust and water-proof when mounted into a panel (When the provided rubber packing is affixed)
Weight
Approx. 800g
Standard Accessories
Instruction manual, connector for CC-Link, rubber packing,
terminal strip cover, capacity plate and unit stickers
CAD File(DXF) Some characters may be garbled as the original CAD data is in Japanese.