Test and Measurement

AD-3552 Vibration Comparator
Dependable Production Line Partner !
This product has been discontinued.
The sale ends when all the stock is sold out.

To meet the demands of rapid change in the factory automation industry, A&D offers a powerful field tool with a new high level of performance.

The AD-3552 was created with a comparator function for machinery vibration & noise testing for production.

The AD-3552 FFT Comparator provides noise and vibration analysis that instantaneously delivers judgments "OK" or "NG" (no-good)for product testing of bearings, motors, etc.
Compact, lightweight 1x1.4DIN enclosure easily mounted into rack
Dedicated for comparator, easy to handle
Compatible to Ethernet. Central control by a personal computer
Effortless operations through touch panel interface
With the utility software (provided free), files can be transferred between a PC and the AD-3552 FFT Comparators through Ethernet
Powerful Analysis Software
When a single AD3551 FFT comparator is in use, a setup wizard allows easy setting
of conditions
A setup wizard allows easy setting of conditions
The AD-3552 FFT Comparator has a built-in PC that features superior reliability and fast response
Setting judgment parameters for level, partial overall, octave band, total overall is practicable. (Block: 20 types, Shape: 1 type, Total overall: 1 type)
Judgments under complex conditions can be delivered by combining comparator logic (AND, OR, NOT)
Using a DI/DO board, the AD-3552 FFT Comparator can output judgment results and be controlled externally
Applications and Processing Flow Setup Windows
Applications and Processing Flow
AD-3552 Front image AD-3552 Rear image
Input Section
Maximum Analysis Frequency 20kHz
Number of Input Channels 1
Input Connector BNC
Input Form Single-end
Input Impedance 1MΩ
Input Capacity 100pF or below
Input Voltage Range 100mVrms, 1Vrms, 10Vrms
Input Coupling AC, DC, ICP (0.5mA, 4mA)
AC Coupling Characteristic -3dB at approx. 0.5Hz cutoff frequency
Input Tolerance AC100Vrms
Dynamic Range 80dB (typical)
Overload Detection A/D data over 91% of full scale
Underload Detection A/D data less than 5% of full scale
Analysis Section
Analysis Frequency Range 100Hz, 200Hz, 400Hz, 500Hz, 800Hz,1kHz, 2kHz, 4kHz, 5kHz, 10kHz, 20kHz
Sampling Frequency 2.56 times of analysis frequency range
Sampling Clock Internal sampling
Aliasing Filter Correlated with analysis frequency range
Block Size 512, 1024, 2048, 4096 points
Real-Time Frequency 2kHz
Frequency Resolution 201, 401, 801, 1601 lines
Window Function Hanning, Flat-topped, Exponential
Data Acquisition Mode Free-run, First-trigger, Every-trigger
Averaging Frequency-domain: Added average, Peak hold, Exponential average
Averaging: 1 to 9999 times
Overlap: Max. 93.75%
Trigger Trigger source: Input channel, External input channel
Trigger level: Designated with percentage of full scale
Full scale of external input channel is 25V.
Trigger slope: +/-
Trigger delay: -100% to +100% (Frame size ratio)
Calibration Linear, dB
Analytical Function
Time-axis waveform, Power spectrum, 1/1 octave, 1/3
Display Scaling Full scale, Fixed scale
X-Axis Linear / Octave
Y-Axis Linear / Log / dB
Display Format Amplitude / Power
Time-domain Differentiation / Integration
Frequency-domain Differentiation / Integration
Acoustic weighting A, C, FLAT
Comparator Function
Block Comparators 20 types
Shape Comparator 1 type
Overall Comparator 1 type
Judgment Method Level, Overall
Logic AND, OR, NOT
Judgment Display “OK”, “NG” (Green, Red, Yellow)
Judgment Output Contact output of BUSY, OK and NG signals
Judgment Start External Input Contact input
Measurement data (MFU file), Result list file (CSV format),Setup file
*Measurement data and Result list file for saving only.
5.7-inch STN color LCD (320 x 240 dots)
Touch Pane
Resistive analog touch screen
Ethernet 10Base-T
DO (Digital Output) 31ch (Busy, each comparator judgment result, total comparator judgment result, etc.)
DI (Digital Input) 11ch (Start, Stop, Pause/Restart, Setup file 1 to 20 read)
Serial Port RS232C
General Specification
Operating Temperature and Humidity 10-40°C, RH 85% or below (Non condensing)
Power Supply 85~250V AC (50/60Hz)
External Dimensions 144(H) × 192(W) × 169(D) mm
Weight Approx. 5kg
External view and specifications subject to change for improvement without notice.

Page Top