Product
DSP AD5430-17(In-vehicle network board)
Features
Supports CAN, serial, K-Line, and LIN communications used within the AD5430 series.
I/O pin assignment
Implemented features
| Communication Type |
Channels |
| CAN communication functional part |
4 |
| CAN CCP |
1 |
| Serial |
4 |
| K-Line |
1 |
| LIN |
4 (under development) |
Common specifications
| Item |
Specification |
| Size |
AD5430 long size IO board; requires one slot |
| Operation conditions |
Temperature: 5Degreeto 40Degree Humidity: less than 80% RH (no condensation) |
Serial communication specifications
| Number of channels |
4 |
| Transceiver |
Software selectable: RS232C, RS422, or RS485 |
| Controller |
LTC1387 |
| Baud rate |
5 to 1M baud
Each channel can be set independently |
| Connectors |
B2L 3.5/14 (WeidMuller) |
| Load for simulation |
1% or less, 4 transmission channels, 9600 baud |
| Terminal resistance |
None |
CAN communication specifications
| Number of output channels |
4 x CAN 2.0B active |
| Transmission ID number |
Transmission 128; reception 128 (transmission / reception per channel) |
| Transceiver |
High speed CAN TJA1041
Optional: single wire CAN AU5790 |
| Controller |
Philips SJA 1000 |
| Base clock |
16MHz |
| Multi-frame transfer |
ISO 15765-2 (OSEC TP) compatible |
| Baud rate |
5,10,20,33,50,66.66,100,125,250,500,1000 kBaud |
| Time stamp resolution |
8µSec |
| CAN feature |
Data frame transmission / reception, error frame transmission / reception,
listen-only mode, reception timeout |
| Connectors |
B2L 3.5/16 (WeidMuller) |
| CAN period output |
1 to 500 mSec. Up to 16 ID can be set up for each channel |
| Isolation |
Bus |
| Terminal resistance |
None |
CAN CCP communication specifications
| Channels |
1 (CAN2.0B) |
| Transceiver |
High speed CAN TJA1041 |
| Controller |
Philips SJA 1000 |
| Baud rate |
5kto1Mbit/s5,10,20,33,50,66.66,100,125,250,500,1000 kBaud |
| Connectors |
B2L 3.5/16 (WeidMuller) |
| Terminal resistance |
None |
K-Line communication specifications
| Number of channels |
1 |
| Transceiver |
MC33990D |
| Controller |
UART(16550 compatible) |
| Baud rate |
5Baudto10.4kBaud |
| Connectors |
B2L 3.5/12 (WeidMuller) |
| Protocol |
Implemented in the model (example KWP2000 protocol) |
| Load for simulation |
1% or less, 10.4 k baud transmission |
LIN communication specifications (under development)
| Number of channels |
4 |
| Master / slave |
Corresponds to both master and slave |
| Baud rate |
Maximum 20kbps, 2400bps, 9600bps, 19,200bps |
| Terminals |
B2L 3.5/12 (WeidMuller) |
Page Top