Product

Weighing

Balances

Page Top

Scales

Page Top

Indicators

  • Static Weighing
    AD-4405
    1/10,000 display resolution
    Bright green VFD 20mm (height) display
    Build in optional dot matrix compact printer
    AD-4406
    1/10,000 display resolution
    High cost-effectiveness
    Big LCD 25mm in height
    AD-4407
    1/10,000 display resolution
    Bright green VFD 20mm (height) display
    Bracket standard
  • Basic Weighing & Simple Filling
    AD-4328
    1/10,000 display resolution
    Full Digital Calibration (FDC)
    Large (14.2mm high), bright red LED display digits
    AD-4329
    1/20,000 display resolution
    Vacuum fluorescent display
    Standard RS232C interface
  • High Performance Weighing/Batching
    AD-4401
    High display resolution to 16,000 counts
    Up to 1 million counts of A/D resolution
    100 times/sec. High speed sampling
    AD-4402
    High display resolution to 16,000 counts
    100 times/sec. High speed sampling
    Stores 100 data for raw materials and 100 data for mixing codes
  • Vibration-Resistant Weighing Indicator
    AD-4408A
    Incorporates Anybus CompactCom (HMS Industrial Networks)
    Improved weighing performance
    Wide zero and span adjustment ranges
    AD-4408C
    Easy-to-use weighing indicator specifically for CC-Link
    Improved weighing performance
    Wide zero adjustment range
    AD-4410 NEW
    Powerful vibration-cancelling function (High Performance Digital Filter)
    High speed sampling (100 times/second)/high accuracy
    Circuits equipped with powerful noise reduction
  • Programmable Controller
    AD-4820
    Responds to the wide market needs of the weighing and control field.
    Enables originality via its programming and GUI function (IDE tool).
    AD-4820 Ready Mixed Concrete Batcher Controller
    The AD-4820 ready mixed concrete batcher controller can control cement batching for up to 12 ingredients using 4 scales or 8 scales.
    AD-4826
    Model predictive feeder controller
    For high-speed, highly accurate continuous feeding of powder and dry solids.
  • Explosion Protected
    AD-4403FP
    Explosion protected ExdIIBT5
    1/10,000 display resolution.
    High sampling speed — 100 times per second
  • Check Weighing Indicator
    AD-4404
    100 times/sec. High speed sampling
    High display resolution to 16,000 counts
    Bar graph shows where the weight of an object falls within the OK range
  • Multi-purpose Digital Indicator
    AD-4530 NEW
    Low cost digital indicator for various applications.
    Digital Zero (DZ) stores zero data at any measurement point.
    Power on zero function adjusts to zero when the power is turned on.
    AD-4531A
    Digitally processed signals with 16 times/s A/D conversion
    Peak hold and hold capability
    Analog output with scaling and offset functions
    AD-4532B
    Super high-speed sampling at 2000 times/sec.
    New tricolor (orange, green & red) LED display
    Enhanced comparator functions
  • Analog Signal Conditioner
    AD-4541-V/I
    Ultra-slim, lightweight and easy-to-install
    Provides a wide-range zero adjustment (±1.6mV/V) / span adjustment
    (0.4~3.2mV/V) for use with various bridge type sensors

Page Top

Load cells

  • Single Point
    LCB03
    Ultra compact design --Just 13cm in length
    Adjusted for 4 corner loads
    Moisture proof
    LCB04
    Ultra compact design -Just 15cm in length
    Adjusted for 4 corner loads
    Moisture proof
    LC-4001
    Parallelogram-type construction
    Ultra-high sensitivity, resolution as high as 10 mg
    Metal overload stopper built in
    LC-4101
    Parallelogram-type construction
    Temperature compensation maintains both zero and span
    Deadweight up to 80 % of capacity
    LC-4102
    Parallelogram-type construction
    Temperature compensation maintains both zero and span
    Deadweight up to 80 % of capacity
    LC-4103
    1/10,000 display resolution
    Bright green VDF 20mm (height) display
    Bracket standard
    LC-4204
    Parallelogram-type construction
    Can be used for both single point and multi point applications
    Temperature compensation maintains both zero and span
  • Stainless Steel
    LCS15
    Best suited for tank and hopper scales. The corrosive-resistant, stainless steel is ideal to be used in harsh environments.
    The structure is less susceptible to biased loading.
    Compression measurements are also possible.
    LCB05
    Stainless steel hermetical sealed structure
    ldeal for application under harsh environment
    Maximum platform size is 400×400mm
    LCC07
    Stainless steel housing ideal for using in the food/chemical industry
    Rocking absorption type
    Designed for tanks and hoppers
    LCC11
    Hermetical sealed stainless steel construction protection from water,moisture and corrosion (IP68)*
    Advanced load design for tanks, hoppers and truck scales
    LCC12
    Hermetical sealed stainless steel construction protection from water,moisture and corrosion (IP68)*
    Advanced load design for tanks, hoppers.
    LCM13
    Stainless steel body is ideal protection from corrosion (IP67)
    Low profile and lightweight for easy mounting
    Compact size.
    LC-4221
    Hermetically sealed with stainless steel bellows protects from water and moisture
    Compact size and lightweight
  • Multi-purpose
    LC-1205
    Dual guided cantilever and shear beam design for high accuracy
    Compact, lightweight and easy to handle
    Temperature compensation maintains both zero and span
    LC-1216
    Dual guided cantilever and shear beam design for high accuracy
    Hermetically sealed for complete protection from water and moisture and for use in harsh environments
    LC-5206
    Constant moment beam and shear beam construction
    Designed to resist overload damage
    Tension and compression loading
    LC-5207
    Ring-shaped design resists side forces
    Compact design ideally suited for pitiless truck scales
    Moisture protected
    LC-5223
    Low profile and lightweight for easy mounting
    For both tension and compression usage
    Can be used for multi-point weighing
  • Hazardous & Special Applications
    Orientec Load Cells
    CP, TP, C2ZI, C2X1, LBP-FP, LBP, CMX, CM, U2Z1,U2X1,RWL, SPN Series
    X-Y Series
    Ideal for tire uniformity measurement, etc.
    Simultaneous measurement in the X and Y directions with one unit
    Structure designed for excellent toughness and durability
  • Flameproof
    LCM17
    Suitable for use in harsh environments.
    Suitable for platform or tank scales.
    For both tension and compression applications.
    LCB01 / LCB02 / LCB06
    Adjusted for four corners
    Tension and compression loading
  • Platform Scale Kits
    LC-4212
    Rugged, reliable construction
    Moisture resistant, single-point construction
    Overload stopper protection
  • Complete Platform
    SB Series
    Water and dust proof (IP-65 /NEMA4) for sanitary, clean,safe, use in the toughest industrial environment
  • Peripheral
    Summing / Junction Box
    Summing box
    Junction box

Page Top

Peripherals

  • Peripherals
    AD-8118C Printer
    The AD-8118C is a universal printer designed for connection with indicators, scales and electronic balances.
    AD-8121B Printer
    A wealth of functions, including: Interval printing function, statistical function, calendar clock function and chart print function.
    Impact dot matrix printer for superior readability and long term durability.
    AD-1671 Anti-vibration Table for Balances
    Isolates a precision analytical balance from vibrations that are imperceptible by humans but seriously affect the stability of weighing
    AD-1672 Tabletop Breeze Break
    Shields a highly sensitive analytical balance from breezes and minute temperature changes caused by air conditioning or people passing by
    AD-1682 Battery Unit
    The AD-1682 is a rechargeable battery unit exclusively designed for A&D's weighing products.
    AD-1683 Static Eliminator
    Can be easily and safely installed because they require no high-voltage wiring
    Little or no reverse charge is induced by irradiated ions because of its excellent ion polarity balance.
    AD-1684 Electrostatic Field Meter
    The AD-1684 is an electrostatic fieldmeter designed for detecting the existence of static electricity, which is often the cause of inaccurate weighing.
    AD-1685 Anti-Vibration Table for Viscometers
    The AD-1685 is an anti-vibration table that effectively isolates the SV-A Series viscometer from adverse vibration, enabling stable and accurate measurements.
    AD-1687 Weighing Environment Logger NEW
    Simultaneous and chronological recording of environmental and weighing data
    Four kinds of environmental data: Temperature, humidity, barometric pressure, and vibration
    Large memory capacity of 10,000 data sets
    AD-1688 Weighing Data Logger
    The AD-1688 weighing data logger is a handheld device that lets you collect weighing data without connecting the balance or scale to a PC!
    AD-1689 Tweezers for Calibration Weight
    The AD-1689 is a pair of tweezers that are ideally suited for manipulating calibration weights (10 ~ 500g).
    AD-8526 Serial / Ethernet Converter
    The AD-8526 can connect the RS-232C interface of an A&D weighing instrument to the Ethernet (LAN) port of a computer.
    AD-8527 Quick USB Adapter
    The AD-8527 transfers weighing data to a PC in real time via an RS-232C connection with a weighing instrument and a USB connection with a PC. This enables a PC without COM ports to receive data.
    AD-8920A Remote Display
    Ideally suited for using a balance over the counter!
    AD-8922A Remote Controller
    AD-8922A is a remote controller that can be connected to certain A&D weighing instruments in order to display weighing data and control the weighing instrument with key operation.
    AD-8923-CC Remote Controller
    The AD-8923-CC is an exclusive remote controller for the AD-4212C Series.

Page Top

Software

  • WinCT
    WinCT
    WinCT (Windows Communication Tools Software) is so easy to use, that anyone can download data from an A&D balance directly to a PC! It is compatible with any A&D balance that is equipped with an RS-232C Interface.
    WinCT-Plus
    "WinCT-Plus" (Windows Communication Tools Plus LAN & Multi Rs Version) is Windows Data Communication Software for LAN Connection enabling to connect multiple A&D electronic balances/scales equipped with an RS-232C interface to a LAN port of a computer via Ethernet or directly to the COM ports on the computer for data collection.
    WinCT Moisture
    The WinCT-Moisture is ideal software to use when measuring with the MS/MX/MF moisture analyzers.
    Win-UFC
    Data can be transmitted and received via RS-232C between a weighing instrument and a computer. The result transmitted/received can be displayed on the computer screen and saved in text file. Printing is also possible.
    WinST
    WinST is a program for reading settings such as code numbers or function settings stored in a text file on a PC from and writing the saved files to an A&D indicator.

Page Top